Perhitungan Cooling Load Temperature Difference (CLTD) Secara Manual Dan Menggunakan Aplikasi Daikin Pada Gedung Multimedia  Politeknik Tanjungbalai

Muhsin Harahap muhsin; Arief Rahma Septian; Marwan Affandi; Eka Dodi Suryanto; Muhammad Dani Solihin; Azmi Rizki Lubis; Jasman Wanfaber Parningotan Saragih

doi:10.59086/jti.v2i3.414

Authors

Muhsin Harahap muhsin Universitas Negeri Medan
Arief Rahma Septian Politeknik Tanjung Balai, Tanjung Balai
Marwan Affandi Universitas Negeri Medan
Eka Dodi Suryanto Universitas Negeri Medan
Muhammad Dani Solihin
Azmi Rizki Lubis Universitas Negeri Medan
Jasman Wanfaber Parningotan Saragih Akademi Maritim Belawan

DOI:

https://doi.org/10.59086/jti.v2i3.414

Keywords:

Suhu temperatur Pengkondisian Udara Beban Pendingin Ruangan

Abstract

Air conditioning for residential comfort is important for human life for the early days of the changing weather climate that affects the temperature of the air temperature in residential dwellings. The air conditioning system is one of the business actions in the form of maintaining the temperature level in the room from the low level of the ambient temperature around it by absorbing heat from the material or room. The air conditioning load is also carried out to determine the AC capacity needed. Research conducted by the Glamour Mansion Tanjung Morawa Housing Complex using the method used is to calculate cooling capacity based on GA (General Arranggement) which includes several parameters, namely the number of people, number of windows, room volume, equipment, and heat from lights. So that the calculation of Heat Calculation, Air Capacity, and Cooling Capacity in a complex is obtained. From the results of the study it is known that the AC cooling load for the Glamour Mansion Tanjung Morawa Complex is the living room 1482 BTU / h, Room I 1953 BTU / h, Room II 800 BTU / h. 1 AC with a capacity of ½ PK in the room. 1 AC with a capacity of ½ PK in each room.

References

Dharma, B. (2018). Analisa Komparasi Coeffisient Of Performance (Cop) Kte-2000ev Menggunakan Pipa Kapiler Dan Katup Ekspansi Otomatis. Ready Star, 1(1), 146–151.

Dharma, B., Parinduri, A., Rafiqoh, S., Yusfiani, M., Diana, A., Saragih, J. W. P., & Harahap, M. (2023). Impression : Jurnal Teknologi dan Informasi Analisa Perhitungan Beban Pendingin Ruangan Di Komplek Glamour. Jurnal Teknologi Dan Informasi, 2(2), 111–116.

Desky, F. S., Hardi, S., Rohana, R., & Harahap, M. (2022). Intensitas Konsumsi Energi Listrik Dan Analisa Peluang Hemat Energi Pada Gedung A, B Dan M Di Kampus Universitas Pembangunan Panca Budi. RELE (Rekayasa Elektrikal Dan Energi): Jurnal Teknik Elektro, 4(2), 104–108.

Elim, K., Surja, A. C., Sudjarwo, P., & Susilo, N. (2015). Perhitungan Dan Metode Konstruksi Sistem Pendinginan Terhadap Auditorium. Jurnal Dimensi Pratama Teknik Sipil, 4(2).

Jaya, A. K., Harahap, C. O., & Andarini, R. (2020). Analisis Perhitungan Beban Pendinginan Ruang Dhammasala Vihara Padumuttara menggunakan Metode CLTD. Ultima Computing: Jurnal Sistem Komputer, 12(2), 57–64.

Muhammad, A. A. A. (2019). Perhitungan Beban Pendinginan Dengan Metoda Cltd Pada Ruangan Operasi Rumah Sakit Universitas Andalas. In Diploma Thesis Unand.

Muharnif, M., Syaputra, S. A., Harahap, M., & others. (2021). Review Mesin Pengiris Keripik Singkong Untuk Home Industri. Atds Saintech Journal Of Engineering, 2(2), 29–37.

Muslimah, A. N. U. R. (2018). Perhitungan Beban Pendinginan Pada Central Kitchen Dengan Menggunakan Metode Cltd (Cooling Load Temperature Difference). In Repository Mercubuana.

Saputra, N. U. R. R. D. W. I. (2020). Analisis perhitungan beban pendingin pada ruang istirahat pt.“y” dengan metode cltd. In Universitas Mercu Buana.

Widiyanto, F. (2018). Perancangan Sistem Pengkondisian Udara Power House Menggunakan Metode Perhitungan Beban Pendinginan CLTD (Cooling Load Temperature Difference) di PT. OPSICO Semarang. In Diploma thesis, Politeknik Perkapalan Negeri Surabaya.